Fixr's plumber cost guide (updated January 2025) says plumber hourly rates run $75 to $150, with a national average of $90, and that many plumbers add a service call fee of $50 to $300. Fixr notes the full range runs from about $45 to $200 an hour, with the low end for small jobs and the high end for a master plumber on a complex project. Sacramento prices vary. This page explains how those numbers combine into a final bill, and what to ask before you agree.
For the plumbing help available around Sacramento in general, the plumber guide home page is the best place to start. If you want job prices instead of hourly rates, see the full list of plumber costs in Sacramento.
Before you start: what does an hourly rate include?
An hourly rate covers the plumber's time, truck, tools, insurance and overhead, but usually not parts. The same $140 an hour can mean very different things at two businesses, because one may quote it for the plumber alone and another for a plumber and helper. Ask what is included before comparing numbers.
Parts are billed on top. Permits, if required, are billed separately or folded into a flat price. Travel time may count as billable at some businesses, and not at others. Two quotes at $110 and $150 an hour can come out the same after one counts travel and parts markup and the other does not. Always compare the total job price, not the hourly figure alone.
| Item | Range in the cited guide |
|---|---|
| Hourly labor, standard hours | $75 to $150, average $90 (Fixr) |
| After-hours or weekend rate | About $150 an hour is the standard emergency rate (Fixr) |
| Call-out or service fee | $50 to $300 (Fixr) |
| Minimum charge | 1 hour, sometimes 2 |
| Apprentice or helper, per hour | $20 to $40 for an apprentice (Fixr) |
These figures come from Fixr's plumber cost guide (updated January 2025). Sacramento prices vary, and the plumber you hire sets the real rate.
How much does a good plumber charge per hour?
A good plumber is not always the cheapest or the dearest. Price tracks experience and overhead, so a plumber with strong expertise in your type of job may charge more per hour and finish faster than a cheaper one. What matters is the total, the license and a written quote.
Hourly price is a poor test of quality. A $95 an hour plumber who takes five hours costs more than a $150 an hour plumber who takes two. Here is how to judge:
- Check the license number with the Contractors State License Board. It is free and takes a minute.
- Ask whether the quote is a flat price or hourly with a cap.
- Ask if the plumber carries insurance and workers' compensation, and ask to see proof.
- Read how long the labor warranty runs, in writing.
- Look for a plumber who explains the cause before the cost.
California requires a contractor's license for jobs of $1,000 or more in labor and materials, or for any job that needs a permit. A plumber without a California contractor license can only legally take small jobs under $1,000 that need no permit and no hired workers, and the CSLB says a homeowner may be able to recover money paid to an unlicensed contractor on a job that required a license.
What is the average cost of a plumber service call?
Fixr's plumber cost guide puts a service call fee at $50 to $300, with journeyman plumbers at $50 to $150 and master plumbers at $150 to $300. That fee pays for the visit and a diagnosis, and some businesses credit it toward the repair. Others waive it if you book the job. After-hours calls are higher.
Ask these questions when you call: Is there a call-out fee? Is it credited toward the work? What is the hourly rate after the first hour? Is there a minimum? A plumber who gives clear answers before sending a truck is usually the one who bills clearly after. For after-hours work, the page on emergency plumber help covers when the higher rate is worth paying and when it can wait.
How much does plumbing cost per square foot?
Plumbing costs per square foot only make sense for large projects, such as a full repipe. Fixr's plumber cost guide puts replacing the plumbing in an existing house at $2 to $6 per square foot. Most repairs are priced by the job.
Fixr's guide puts the cost to replace the plumbing in an average 2,000 square foot house at $4,000 to $12,000, before drywall repair, and the price varies with the pipe material, the number of fixtures and the access. The full breakdown lives on the page about repipe house cost. Per-square-foot figures are rough averages. A house with two bathrooms in the middle of the floor plan costs less per foot than a sprawling one with the kitchen at one end and the laundry at the other.
A bathroom remodel is a good example of why square footage misleads. The count of fixtures and the position of the drain line matter more than the floor area.
How much does a plumber charge to replace an outdoor spigot?
Fixr's plumber cost guide lists $50 to $100 to replace an outdoor spigot, also called a hose bib. Many plumbers do this as a flat price. A frost-free model costs more than a basic one, though Sacramento winters rarely freeze pipes hard enough to need one.
Costs rise if the spigot sits on a wall that needs opening, if the supply line is corroded or if a shutoff valve must be added inside. A job that takes 30 to 60 minutes may still hit the one-hour minimum. If water is leaking inside the wall behind the spigot, tell the plumber when you book, because that changes the job.
When is a flat rate better than hourly?
A flat rate is better when the job is standard and the plumber can see it first: a toilet swap, a water heater replacement, a disposal. It protects you if the job runs long. Hourly is better for open-ended work such as tracing a leak, where nobody knows the time in advance.
With hourly work, ask for an estimate range and a cap that the plumber must call you about before passing. With flat-rate work, ask what could change the price, such as finding rotted pipe once the wall is open. The clearest quotes are written, itemized and signed before work begins. California law also limits a down payment on a home improvement contract to the lesser of 10 percent or $1,000, so a request for more should raise a flag. To see how a visit runs from the first call to the final check, read how a job runs.
Questions people ask
How long does plumber take?
Most small plumbing repairs take one to three hours, and a water heater swap takes half a day. A repipe takes two to five days. Ask for a time window when you book, and ask whether the plumber needs a permit inspection, since inspections add waiting time between steps.
What should I ask before I hire someone for plumber?
Ask for the contractor license number and check it with the CSLB. Ask whether the price is flat or hourly, what the call-out fee is, whether parts and the permit are included, and what warranty comes with the labor. Ask for the quote in writing before work starts.
Do I need to be home for plumber?
Yes, in most cases. An adult should be home to give access, point out the problem, approve any change in price and check the finished work. Clear the area around the fixture and shut-off valve, and put pets away. If you cannot be present, ask the plumber how they handle access and payment.
How much does a plumber cost to find a leak?
Fixr's slab leak guide (updated May 2025) says leak detection costs $100 to $400, depending on how invasive the detection must be. Fixing the leak is a separate charge. The page on plumber leak detection cost breaks down each method and what slab leaks cost.
Sources used
Last changed
