A plumber for shower repair fixes leaking or dripping shower valves, stuck or loose handles, temperature swings, weak flow, and leaks behind the wall. Most visits replace one part, such as a cartridge, a seal or a diverter. Fixr's plumber cost guide lists $100 to $600 for shower repair and $75 to $200 for a leaky shower faucet. The same plumber usually handles dripping faucets and leaking sinks on the same call. If the only problem is weak flow, start with why shower pressure is low.
What do you call someone who fixes sinks?
A plumber. In the United States the trade is plumbing, and the same plumber who fixes sinks and faucets also repairs showers, tubs, toilets, water heaters and drain lines. Some specialize in service and repair work, others in new construction. For a dripping faucet or a leaking shower valve, you want someone who does residential service calls.
A few terms you may meet:
- Service plumber. Handles repairs and replacements in existing homes. This is the person you want for a shower or sink repair.
- Remodel plumber. Works on moving fixtures, adding bathrooms and opening walls.
- Handyman. Not a plumber. California lets an unlicensed person take small jobs under $1,000 in total labor and materials, as long as no building permit is needed and no employees are involved. A valve replacement can easily pass that line once parts are added, so ask whoever you hire which side of it the job sits on.
- Contractor license. The California Contractors State License Board issues the plumbing license (class C-36). You can look up any license number on the state board's website before you hire.
What does a plumber for shower repair involve?
The plumber finds where the water is going or what is wrong, shuts off the supply, replaces the failed part, and tests under pressure before leaving. Most repairs fit into four groups: cartridge and handle problems, diverter and spout problems, supply or drain leaks, and flow problems.

Cartridge and handle. A worn cartridge causes drips from the spout, temperature swings and a stiff or loose handle. The plumber removes the handle and trim, takes out the cartridge and fits a matching new one. Matching is the slow part, because there are many brands and sizes.
Diverter and spout. A tub-and-shower combination uses a diverter to send water to the head. If water keeps running from the tub spout while the shower is on, the diverter or spout is worn. This is often a quick swap.
Leaks. A leak behind the wall can come from a supply joint, the valve body or the drain. Signs are stains on the ceiling below, soft drywall, loose tiles or a musty smell. The plumber may open an access panel or cut a small hole to inspect.
Flow. A scaled showerhead, a clogged cartridge or a partly closed stop causes weak flow. California limits showerhead flow to 1.8 gallons per minute, so some low-feel showers are working as designed.
Faucets and sinks. On the same visit, plumbers commonly repair dripping faucets, replace worn supply lines, tighten loose drains and fix a leaking P-trap. If a bathroom or kitchen sink has weak flow, a clogged aerator is the usual suspect, and the fix takes minutes.
What affects the price of shower repair?
Fixr's plumber cost guide (updated January 2025) lists $100 to $600 for shower repair and $75 to $200 for a leaky shower faucet. The low end is a service call with a cartridge or trim fix. The top end is a valve replacement with tile work. Sacramento prices vary, and the specialist who quotes you sets the actual price.
| Job | Typical range |
|---|---|
| Replace a shower cartridge or diverter | $75 to $200 for a leaky shower faucet (Fixr) |
| Replace a shower valve, accessible from behind | $100 to $600 for shower repair (Fixr) |
| Repair or replace a bathroom or kitchen faucet | $150 to $600 to replace a faucet (This Old House) |
What drives it:
- Access. A panel on the back side keeps the job cheap. Opening tile adds a repair on top of the plumbing.
- The valve brand. Some parts are common; others are hard to match and may force a full valve change.
- Time of day. Evening and weekend calls often cost more. For standard hourly figures see how much a plumber costs per hour.
- What you supply. If you pick the faucet, the plumber charges for labor only. If the plumber supplies it, parts are added.
- Hidden damage. Rot or mold behind a long-term leak adds a carpentry and drywall bill that a plumber does not always do. Ask before you start.
The wider plumber cost page gives ranges for other common jobs, and leak detection pricing is useful when you cannot tell where a leak starts.
How do you know when a shower repair cannot wait?
Some shower faults can wait a few days. Others cannot. A slow drip from a spout is an annoyance. A leak that stains the ceiling below, soft or spongy wall tile, or water running behind the wall with the shower off needs attention the same day, because water damage and mold grow fast.
Plan around these:
- Wait a few days: a dripping spout, a stiff handle, mild temperature swings, a loose showerhead.
- Call today: staining on a ceiling below the shower, a puddle that returns, a hissing in the wall, or a valve that will not shut off. Shut off the water at the stop valve or the main until the plumber arrives.
- Weak flow only: try cleaning the showerhead and the faucet aerators. If low pressure is across the house, see plumber for low water pressure.
- Hot water that runs out or never gets hot: that points to the heater. See no hot water.
- Clogged tub or shower drain: a different job. Our guide on draining a clogged bathtub covers the safe first steps.
Questions people ask
How long does a plumber for shower repair take?
A cartridge or diverter replacement usually takes one to two hours. A valve replacement with access takes two to four hours. Work that opens tile can take a day or more, including the repair of the wall. The plumber should give you a window after seeing the shower.
What should I ask before I hire someone for shower repair?
Ask whether the quote covers diagnosis, parts and labor, and what happens if the wall has to be opened. Ask who repairs the tile or drywall afterward. Ask for the price in writing, and check that the business holds a California contractor license, which you can look up on the state licensing board site.
Do I need to be home for shower repair?
Yes, in most cases. The plumber needs access to the shower, any access panel and the shutoff valves, and you should approve the price once the fault is found. If you cannot be there, agree access and the quote beforehand.
Why does my shower drip after I turn it off?
A worn cartridge or seal is the most common cause. Water keeps passing through the valve even when it is closed. Replacing the cartridge usually stops it. If the drip comes from the head, the seat or the diverter may be the issue.
Can I fix a leaking shower faucet myself?
Sometimes. If you can shut off the water, remove the handle and match the cartridge, a swap is within reach for a confident DIY owner. Valves behind tile, corroded fittings and unknown brands are better left to a plumber, since a mistake can cause a wall leak.
Why is the water pressure low at my kitchen sink?
A clogged aerator at the tip of the faucet is the usual cause. Unscrew it, rinse out the grit and scale, and refit it. If both hot and cold are weak, check the angle stop valves under the sink. If every tap is weak, see the whole-house page above.
Read on
- Low shower pressure
Shower water pressure low but the rest of the house is fine?
Every service and price guide is on the plumber guide for Sacramento.
Sources used
Last changed
